Knitting Pattern for Wormie

Wormie by Stana D.S.

Finished toy size: 6" (15cm)
Yarn: Approximately 180g of yarn in medium weight. I have used various remnants of yarn, all in similar thickness and weight. Small ball of white yarn (for body, arms, and eyes), small amount of red yarn (for lips), and small amount of black yarn (for eyes).
Recommended Needle Size: DPN US#3/3.25mm (set of 4). Or use your preferred needles for knitting in the round. Also the tool for making the tubes, or you can do the I-cord technique.
Notions: Yarn needle, scissors, stitch marker, polyester fiberfill (1 small bag), the spool for making the tubes, crochet hook.
Abbreviations: KFB = Knit in front and back of the same st, it creates 2sts from 1st.
SSK = Slip st, slip st and knit the 2sts together. This decrease 2sts to 1st.
I-cord = the stitches are knitted from one needle to second needle, do not turn the needle with sts around, just push the sts to the beginning of the needle and knit again. This technique makes tube.

INSTRUCTIONS: Wormie is knitted in the rounds, start at the bottom of the body. The eyes, arms and lips are knitted separately and sewn on.  The colorful loops are made separately (whichever method you prefer - I-cord or on the spool) and sewn onto the body.

Tubes: With the DPN cast on 4sts and I-cord the tubes. Or if using the spool make the tubes on the spool. Use various colors of yarn, the length of stripes should be random, or if preferred the same length. You will need approximately 6 -7 tubes in the length of about 3meters (120") each, this depends on how big the loops will be when you will sew them onto Wormie's body.
Body:
With the yarn and three DPN cast on 6sts (2sts per needle). Place the stitch marker on the first st and begin working in the round.
Row 1: Knit around (6sts total)
Row 2: KFB all around, 4sts per needle (12sts total)
Row 3: Knit around (12sts total)
Row 4: KFB all around, 8sts per needle (24sts total)
Row 5: Knit around (24sts total)
Row 6: *KFB, Knit 1; repeat from * around, 12sts per needle (36sts total)
Row 7: Knit around (36sts total)
Row 8: *KFB, Knit 2; repeat from * around, 16sts per needle (48sts total)
Row 9 - 22: Knit around (48sts total)
Row 23: *SSK, Knit 6; repeat from * around, 14sts per needle (42sts total)
Row 24 - 26: Knit around (42sts total)
Row 27: *SSK, Knit 5; repeat from * around, 12sts per needle (36sts total)
Row 28 - 30: Knit around (36sts total)
Row 31: *SSK, Knit 4; repeat from * around, 10sts per needle (30sts total)
Row 32 - 34: Knit around (30sts total). Thread the tail from the cast on sts on a yarn needle. Stitch through all of the cast on stitches, pull up tight to close the hole, stitch to secure. Begin to stuff the body with fiberfill.
Row 35: *SSK, Knit 1; repeat from * around (20sts total)
Row 36: Knit around (20 sts total)
Row 37: *SSK, Knit 1; repeat from * around, the last will be SSK (13sts total)
Row 38: Knit around (13sts total). Finish stuffing the Wormie. Cut the yarn, leaving long enough tail, and thread the end on a yarn needle. Pull the end through the remaining stitches on needles, gather up and close the hole, stitch to secure.

Eye balls (make 2):
With the yarn and three DPN cast on 9sts (3sts per needle). Place the stitch marker on the first st and begin working in the round.
Row 1: Knit around (9sts total)
Row 2: *KFB, Knit 2; repeat from * around, 4sts per needle (12sts total)
Row 3: * KFB, Knit 3; repeat from * around, 5sts per needle (15sts total)
Row 4: Knit around (15sts total). Change the yarn to the black yarn.
Row 5 - 6: Knit around (15sts total)
Row 7: *SSK, Knit 3; repeat from * around, 4sts per needle (12sts total)
Row 8: Knit around (12sts total). Thread the tail from the cast on sts on a yarn needle. Stitch through all of the cast on stitches, pull up tight to close the hole, stitch to secure. Begin to stuff the eye ball with fiberfill.
Row 9: *SSK, Knit 2; repeat from * around, 3sts per needle (9sts total)
Row 10: Knit around (9sts total). Finish stuffing the eye ball. Cut the yarn, leaving long enough tail, and thread the end on a yarn needle. Pull the end through the remaining stitches on needles, gather up and close the hole, stitch to secure.  Sew the eye ball on Wormie's head using the picture as a guide. Repeat for the second eye ball.

Arms (make 2):
With the yarn and two DPN cast on 6sts (sts per needle). Place the stitch marker on the first st and begin working in the round.
Row 1 - 20: Knit around (6sts total)
Row 21: KFB around, 6sts per needle (12sts total) Divide the sts for 3 fingers, each finger has 4sts. You will need the first 2sts and the last 2sts for the first finger. Leave the remaining sts on a stitch holder. Continue working in the round with 4sts for the first finger
Row 22 - 24: Knit around (4sts total)
Row 25: Knit around (4sts total) Finish stuffing the finger. Cut the yarn, leaving long tail, and thread the end on a yarn needle. Pull the end through the remaining stitches on needles, gather up and close the hole, stitch to secure. Reattach the yarn and continue with the second finger. Use the next 2sts from the front and 2sts from the back of the arm. Repeat the rows 22 - 25 for all other fingers. Weave in all the ends.
Thread the tail from the cast on sts on a yarn needle and sew the arm on the body of Wormie using the picture as a guide. Repeat for the second arm.

Lips: With the red yarn and DPN cast on 4sts.
I-cord 4rows. Continue knitting in the rounds.
Row 5: SSK around (8sts total)
Row 6: Knit around (8sts total)
Row 7: *SSK, Knit 1; repeat from * around (12sts total)
Row 8: Knit around (12sts total)
Row 9: *SSK, Knit 1; repeat from * around (18sts total)
Row 9: Knit around (18sts total)
Row 10: Knit and cast off all sts. Cut of the yarn and leave long enough tail. Sew the cast off sts to create the pucker up lips all around Wormie's lips, weave in the end. Thread the tail from cast on sts on a needle and sew the lips onto Wormie's body using the picture as a guide.

Finishing: Take the first tube and start sewing it onto the Wormie's body. Stitch through the tube to secure the beginning onto the body, make a small loop and secure the loop by sewing it to Wormie's body. Keep continue to make the small loops and sewing it to the Wormie's body. Start at the top of Wormie's head and work around his eyes, lips, and arms. Continue until you cover the entire body with loops. I was sewing the loops onto the body in the rounds. Finish the loops on the bottom, by creating the four loops that make it easier for Wormie to stand. See the picture as a guide. 

Copyright: This pattern was design and written by Stana D.S. The pattern is for personal use only. The finished items may not be sold for profit, except for charity purposes. Please acknowledge the author. Thank you.